M951
- POWER SUPPLY: 8 TO 32VDC.
- SUPPLY CURRENT: 30 mA MAXIMUM
- OPERATING TEMPERATURE: -30 F TO +250 F (-35 C to 125 C)
- SENSED FREQUENCY: 0 TO 20 KHZ
- OUTPUT VOLTAGE: SQUARE WAVE.
- LOGIC 0: WHEN NEAR FERROUS MATERIAL, ACTIVATES SENSOR.
* +0.5V AT ≤ 50mA. - LOGIC 1: WHEN NO FERROUS MATERIAL PRESENT
* FOR Vin ≤ 24V USE A PULL UP RESISTOR ≥ 1KΩ
* FOR Vin ≤ 16V USE A PULL UP RESISTOR ≥ 330Ω - INSULATION RESISTANCE: 100 MEGAohm MIN. AT 50 VDC (COMMON TO HOUSING)
- HOUSING: 303 STAINLESS STEEL, BLIND END.
5/8-18 x 4.5" - 3 Pin
Active (Powered) - Ordinary Area
Zero Speed Hall-Effect Sensors
This hall effect sensor is designed to sense ferrous material (gear teeth, hole or pin) for speed measurement down to zero-speed. The digital output is compatible with most PLC input cards. This sensor has a long reach (4.500 inches) and a 5/8-18 thread.
Related products
Contact Us Directly
Reviews
There are no reviews yet.